This is the great brightly colored INTELLIGENT DESIGN IS SCIENCE FICTION Bumper Sticker!
This awesome and high quality bumper sticker measures about 3X10
Our stickers are printed on at least 3.5mm vinyl, using only professional grade material.
The vinyl is UV and moisture protected for 2-3 years. Made also with eco solvent ink that will also last 2-3 years outdoors continual outdoor exposure.
Applying our stickers:Some of you may be used to the thick 'crack and peel' stickers'. In the vehicle graphic business the thinner the vinyl the better quality. Ours are thinner and better quality than 'crack and peel' . But because of that a little more care is needed to apply them.
IMPORTANT: Do not apply in very hot weather. Do not apply to a hot surface. Wait till it cools or apply indoors. The reason is that the vinyl stretches when its really hot.
First clean the surface with water, making sure to remove any dirt. Peel off the paper backing. Align the sticker where you want it and place it on the vehicle. Work it from the center out with your thumbs or even use a credit card in a squeegee style.
If you get any bubbles don't be too concerned. it's just trapped air and will go down naturally over the next day or so (as the vinyl breathes). If it really bugs you and you don't want to wait, simply prick any bubbles with a sharp pin.
Extra tip:A handy tip that you can use is to get a spray bottle of water and soak the area the sticker is going onto first. Then place the sticker on and squeegee the water out from behind the sticker with your thumbs (or a credit card used as a squeegee). That way you get no bubbles or creases. The water will dry soon enough and the sticker remains in place.
Removing our stickers:Vinyl stickers can be removed quite easily under most conditions. Typically they will peel up in one or two pieces. In lower temperatures, when the surface is cold the vinyl may become a little more brittle. In which case it may come off in several pieces. But don't worry, it's not like those horrible paper stickers that tear into shreads. If a sticker has been on for many months it may leave a slight residue of gum when you peel it off. This is easily removable with any number of household label adhesive removers such as 'Goo Gone', 'Goof Off' or rubbing alcohol (available at any Hardware Store.) It's always best to test a small section of paint first to make sure your paint job doesnt react to the remover. (it shouldn't but it never hurts to check.)
Extra tip:A hair dryer can help with removal of stickers in cold weather. The heat softens the vinyl and makes it less brittle
Important:If it is NOT the vehicles original paintwork then we do not recommend using ours (or anyones) stickers. If the re spray is of an inferior quality the paint may pull up when removing the sticker.
Disclaimer:No responsibility for any damage to a persons vehicle or property due to the use of an adhesive sticker or car magnet. Also no responsibility for ANY event arising from displaying one of our stickers. It is the sole responsibility of the customer to use best judgement regarding the display and usage of a sticker or car magnet.
Total shipping for bumper stickers to the United States is just $3.48! It doesn't matter how many you buy! So buy up and save!
If for any reason you buy multiple bumper stickers from me and the shipping is higher than $3.48, just ask me for a revised total before you pay! I will then combine the shipping for you, so that your total shipping is just $3.48!
Not in the USA? Not a problem! Shipping for bumper stickers to ANY international location is just $3.99! It doesn't even matter how many bumper stickers you buy!